by Lisa Jackson | 9:46 am

Working with HVAC may be hard to start with, but in the end it’s easy if you have the right kind of information. This article was put together to help people that want to learn about this kind of a thing. If this is interesting to you, then keep reading.

Make sure you check the filters in your air conditioning unit. This is important because checking your filters could make the difference between inexpensive repairs and more expensive ones down the line. Try to put it into your monthly schedule so that you don’t forget to check the filters regularly.

Ask for referrals when hiring someone to install your HVAC system. Someone may seem like they know what they are doing, but you cannot simply take their word for it. You should be able to call past customers to get an idea of what to expect from this particular installer.

Clean the coils and blades in your condenser at the beginning of summer. Always turn the unit off before you do anything to it, including leaning. Remove leaves and debris from the condenser outside.

Your HVAC system should be checked a few times a year. This should be done in the fall and again in the spring. Regular inspection will help you avoid unexpected repairs.

To save money on your HVAC system, turn the air conditioning down at night and let your home warm up a bit. To keep yourself cool, use a chilling water-filled pillow to cool down your head and your whole body as a result. This combined with a fan will keep you from overheating while saving on your utility bills.

If you want to pay for less power use, consider installing an HVAC-specific solar panel system. Such an installation harnesses the power of the sun directly for your heating and air conditioning. Don’t worry though; you can have a switch put in that automatically connects to the power grid the days there isn’t enough sun.

Clean your filters! If you have a window unit air conditioner, there will be a filter right under the grill you can vacuum. If you have a furnace or outdoor units, they will also have filters to be cleaned or replace. A dirty filter can make your unit inefficient or even let it overheat.

AC units will tend to get ice on them due to the cold. The drain line also occasionally freezes, which can be misdiagnosed as a plumbing leak. If you notice this, switch your thermostat to fan only to disable the compressor. If the issue persists, call in help.

If you have a window air conditioner, be sure to check and see if it has an Energy Saver button. If so, use it! This turns off the fan when the unit isn’t actually cooling the air, which can save you as much as 30 kwh over the period of a month!

Make sure that the HVAC contractor you plan to hire does not use subcontractors to do their work. Many people use this as an excuse to shirk their responsibility in the event that something goes wrong when your system is being worked on. Only allow this if there is a note in the contract about what will happen if there is an issue.

Installing a whole-house fan can either cool your home without the use of air conditioning or make your air conditioner more efficient. It blows out all of the hot air which collects in your attic, and this air flow draws in cool air from your basement and up into your home.

Contractors are responsible for their own charges and fees, so make sure you get quotes from several contractors before you make any hiring decision. Making some phone calls before deciding is a good way to save money. You want to call at least a handful of contractors to determine what reasonable rates are.

Now you’re probably a lot more familiar with HVAC than you were before. It’s something that will take you time, but after you learn what to do with it all you’ll do fine. Now the only thing left to do would be to get yourself out there to put these tips to good use!

  COMMENTS OFF

Comments

Comments are closed.